Make Sure Your Electric Battery Is Safe Just By Keeping It Clean

Did you ever really have to jump start your car only to notice that the battery was mired in crud? Had you been wondering what the glop was, it was battery oxidation, formed by acid condensation. You can easily clean this by using a simple chemical solution. A typical household product, namely baking soda, can clean battery acid very easily. Cleaning your battery is not very difficult to do but you should take necessary precautions.

First off, you'll want the tools which you can find easily in the house. The standard tools you'll need are a pair of safety glasses to protect your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. A few open-end and box wrenches, a plastic or metal scraper, cleaning brushes for a battery terminal, and a turkey baster or small funnel. You must also have a few sponges, spray-type household cleaner, rubber gloves and a bucket of clean water. This may seem like lots of things for cleaning a battery, but we did say doing it safely.

A lot of the corrosive build up contain sulfuric acid, so it is a wise idea to use the safety glasses to protect your eyes, and the rubber gloves for your hands. You should make certain that the deposits don't get on the car since it will damage the paint. Determined by how corroded the battery is, the amount of cleaning that is needed may vary. In order to fully eliminate the dirt and corrosion, you will need to take the battery out of the vehicle. The first task is to utilize the scraper to eliminate as much dirt as possible and use the bristle brush to get at more.

The next step would be to come up with a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. Work the formula of baking soda inside the heavily corroded areas with the brush, and disconnect the battery cables from the terminals for discover this info here easier cleaning. It is possible to take away the cables, starting with negative first then positive, using the pliers and wrenches. Brush aside all of the oxidation from the terminals and all of the parts, and then flush each one with the baking soda solution.

You can use the spray cleaner and sponge to eliminate any surplus dirt and grease. Immediately after, dry every one of the parts and reassemble everything and be sure you refasten the cable with positive first. Check things are all secure and you now have a clean, safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *